Custom 20-1500mm Width 36oz Molded/Cut Edge Flat Rubber Transmission Belt

Product Name: Flat Transmission Belt, Cotton Flat Belt
Flat transmission belt is a common flat rubber belt, also called transmission belt, usually uses high-quality cotton canvas as its skeleton layers.It is mainly used in factories, mines, docks, metallurgical industry, ordinary mechanical power transmission, great power processing of grains like rice and wheat, irrigation equipment, wood cutting and other power transmitting equipment for industry.

Conveyor Belt Types: Cut Edge Type, Mould Edge Type
Width: 20mm to 1500 mm
Length: 100 mtr. Roll length  
Fabrics: Hard cotton ducks/soft cotton
Plies: 2 plies to 10 plies
Custom Colors: Beige, Grey, Camel, Yellow, Black, or as per customer requirement  
Category: 28/32/34/36OZ(ounce)
Characteristic: 
. Uniformity in Thickness & Width     
. Higher longitudinal & transverse strengths     
. Higher levels of adhesion     
. Controlled elongation     
. Lighter in weight thus consuming less power     
. Improved resistance to flex fatigue test.

Elongation at break,in vertical tensile test,the elongation at break should not exceed 20%.

Adhesion strength,adhesion between flat belt layers is no less than 3.0KN/M.

→ More Conveyor Belts Please Click to Contact Us.

ST CORD CONVEYOR BELT

Features:
high tensile strength, low extensibility, small used transmission pulley diameter, uniform steel wire rope tension, excellent troughbility and good adhesive between rubber and steel wire.

Applicable Environment:
The belt realizes conveying a large amount of materials at long distance and at high speed in the fields of coal, mine, ports,metallurgy, electric power, chemical engineering, etc.

Technical Data:
The steel cord conveying belt has the general used, high abrasion, cold-resistant and flame-retardant according to the using requirement and the performance of the cover rubber.

EP CONVEYOR BELT

Product Description:
The polyester conveyor belt is also called EP conveying belt. Its
framework material is the polyester canvas interwoven with meridian
terylene and latitudinal polyamide fiber. It has advantages of short
tensile, stable size good elasticity, shock resistant, heat resistant mould resistant, high adhesive strength. lt is applicable to convey material in medium and long distance, with heavy-load and at high speed.

ABRASION CONVEYOR BELT

Features:
1. Energy saving: By improving rubber elasticity and reducing transmission friction coefficient, the effect of saving electricity by 10%-15% can be achieved.
2. Wear resistance. Thus the conveyor belt is wear and impact resistance, and the working life can be prolonged.
3. Suitable for working conditions of long distance, high speed and large capacity.

Application:
This belt is especially suitable for medium, long-distance transportation of materials,used in lines of mining,ports,electricy metalirgical infustry, chemical industry, coalmines and etc.

Reasons For The Occurrence Of Running Resistance:
Multiple resistances occur when the conveying belts are in motion, among which the strongest resistance comes from the momentary resistance of the conveying belt passing the supporting roller.
It is the most effective to reduce the resistance passing the supporting rollers so as to reduce the resistance on the conveying belt device.

CHEVRON CONVEYOR BELT

Shape And Character:
On the sur face of the belt,there is chevron pattern higher than the belt bodyd.The pattern may be either open-end or closed. Each kind of pattern includes three types: high.medium and low.

Usge:
It can convey powde red , granutated and small lump materials at the inclination of no more than 40, it can also convey packaged materials.

Patterned:
Patterned conveyor belt is composed of belt carcass and pattern. The shape and height(depth) of patten is subject to the material it conveyory and the the angle of the machine.

HIGH TEMPERATURE RESISTANCE CONVEYOR BELT

Features:
The belt carcass of this product is EP fabric of high modulus, low shrink and high breaking tensile stength. Cover rubber of this product uses EPDM rubber or chlorobutadiene rubber, after process of shaping and valcanizing, conveyor belt has very good high temperaturte resistance. The carcass of this product has very high adhension after the special trestment of coating and shaping. Undernormal working condition with the temperature blow 200 the belt is ow eloncation and excellent antiabrasion, it can also bear 400°C high temperature for short time.The belt is suitable for use in cement, metallurgical and steel industry.

Quality Control: Raw material, textile adhesion, pullout strength, density, strength, elongation, and more mechanical characteristics testing.

Fuda regards the quality of life, strict quality control. We have a complete set of physical and chemicaltesting equipment and a quality management team, the introduction of Taiwan Gotech 's electronic tensile machine, moving die rheometer, abrasion machine,mooney viscometer and other international leading testing equipment, raw material analysis, semi-finished products control, finished product physical properties and other projects for testing.

ZHEJIANG FUDA RUBBER CO,LTD is professional Conveyor Belt manufacture was founded in 1989. has been focused on rubber conveyor belt production more than 30 years .We are a base of rubber production from design ,production ,sales to service .Max belt width 2800mm ,Max belt weight :35 tons ,steel cord belt up yo ST6300 ,Annual output of 60000 tons of Mixing rubber .Our company manufacture all kinds of ST belt ,multi-ply conveyor belt ,transmission belt such as steel cord conveyor belt , high temperature resistant conveyor belt, abrasion resistant conveyor belt, anti tear conveyor belt , oil resistant conveyor belt , chemical resistant conveyor belt ,fire resistant conveyor belt ,cold resistant conveyor belt ,complete patterned conveyor belt and so on.

Advanced Equipments: Fuda emphasize on the production equipment renewal and transformation upgrade,adopt advanced machines , technology and excellent service .we have 2800mm width vulcanizing machine, passed IS09001 - 2008 international quality system, Fuda was rate as"famous trademark of taizhou city "

Good Paking Service: Standard export packing or customized packing according to your demands.

1.How soon can we get a reply after we send you an inquiry?
---We will reply to you within 24 hours after receiving the inquiry in working days.

2.Are you a direct manufacturer or a trading company?
---We have our own factory, and we also have our own international trade department, we produce and sell ourselves.

3.What products can you provide?
---We mainly produce: ST cord conveyor belt, Sensor conveyor belt, Pip conveyor belt, Anti-tear conveyor belt, EPDM conveyor belt, High temperature resistant conveyor belt, Heat resistant conveyor belt, Fire resistant conveyor belt, EP conveyor belt, NN conveyor belt, SW fabric conveyor belt, Cotton conveyor belt, Chevron conveyor belt, Rough top conveyor belt, Oil resistant conveyor belt, Chemical resistant conveyor belt, Flat transmission belt, Rubber V belt.

4.What application fields are your products mainly involved in?
---Mainly used for transportation tasks in metallurgy, chemical, cement, coking, steel and other industries

5.What is the production capacity of your company?
---Our company covers an area of 35000 square meter and has 25000Square meter of building parts, we have fixed assets of 250 million Yuan, registered capital of 108 million Yuan, its a set of products R&D, design, production, sales and service in one of the production base of rubber belt.

6.How many employees does your company have and how many technicians are there?
---The company has more than 280 employees,including more than 50 professional technicians and more than 25 engineers.

7.How does your company guarantee product quality?
---Fuda regards the quality of life, strict quality control. We have a complete set of physical and chemicaltesting equipment and a quality management team, the introduction of Taiwan Gotech's electronic tensilemachine, moving die rheometer, abrasion machine, mooney viscometer and other international leading testing equipment, raw material analysis, semi-finished products control, finished product physic al properties and other projects for testing.

8. What is the payment method?
---When quoting, we will confirm the transaction method with you,FOB,CIF,CNF or other methods.

9.How to deliver goods to customers?
---Usually,we ship by sea because we are in Taizhou,we are very close to the port,and sea export is very convenient.Of course, if the customer's cargo is urgent, we can also transport it by air. The international airport is very close to us.